Home / GM COMPATIBLE>SMALL BLOCKS>383 ci / GM Small Block Compatible 383 c.i. Engine - 436 Horsepower - Deluxe Dressed - Carbureted
  • GM Small Block Compatible 383 c.i. Engine - 436 Horsepower - Deluxe Dressed - Carbureted
  • GM Small Block Compatible 383 c.i. Engine - 436 Horsepower - Deluxe Dressed - Carbureted
  • GM Small Block Compatible 383 c.i. Engine - 436 Horsepower - Deluxe Dressed - Carbureted
  • GM Small Block Compatible 383 c.i. Engine - 436 Horsepower - Deluxe Dressed - Carbureted

GM Small Block Compatible 383 c.i. Engine - 436 Horsepower - Deluxe Dressed - Carbureted

Quantity
ADD TO CART
BUY IT NOW
  • Detail
    • Detail

      OVERVIEW:

      BluePrint's BP38318CTC1D GM Small Block compatible performance crate engines are Dyno tested at our factory with a Holley Classic 750cfm Carburetor to get 436 horsepower and 443 minimum torque values. This engine features a 4-inch bore which mathematically yields a 377ci with a 3.75-inch stroke. This engine comes with a Timing Cover, Valve Covers, Distributor, Dipstick, Oil Pan, Spark Plugs and Wires, Dual Plane Satin Aluminum Intake, Holley 750cfm Carburetor with Manual Choke, and Air Cleaner.

      Description:

      • Horsepower and Torque: 436 Horsepower / 443 ft. lbs. Torque
      • Compression Ratio: 10.0:1
      • BluePrint Engines Aluminum Heads
      • BluePrint Engines Hydraulic Roller Cam
      • BluePrint Engines Hypereutectic Pistons
      • BluePrint Engines Cast Crankshaft

      Block:

      • BluePrint Engines High Strength Cast Iron Block
      • Drilled and Tapped for Clutch Linkage
      • Mech Fuel Pump Provision: Yes
      • Passenger Side Dipstick
      • 1-Piece Rear Main Seal
      • 4-Bolt Main
      • 4.000" Bore

      Rotating Assembly:

      • Cast Crankshaft
      • 3.750" Stroke
      • OEM Type 5.700" Connecting Rods w/ 150,000 PSI Bolts
      • Hypereutectic Pistons
      • Externally Balanced Front and Rear

      Cylinder Heads:

      • BluePrint Aluminum Cylinder Heads - H8002K
      • 64cc Chamber
      • 2.02" Intake / 1.60" Exhaust Valves
      • 195cc Intake / 75cc Exhaust Runners

      Cam Specs:

      • Hydraulic Roller
      • .544 Intake / .555 Exhaust Lift
      • 230 Intake / 236 Exhaust Duration
      • @ .050-110 Degree Lobe Separation

      Ignition Timing:

      • 34 Degrees Total at 3500 RPM

      Also Includes:

      • Holley Classic 750cfm Vacuum Secondary Carburetor w/ Manual Choke
      • Standard Rotation Long Style Water Pump - BPP67265
      • Aluminum Intake Manifold - BPP350VINT
      • Thermostat and Thermostat Housing
      • Mechanical Fuel Pump - BPP61073
      • HEI Distributor - BPP350RBK
      • Valve Covers - BPP9518
      • Fuel Pump - BPP61073
      • Harmonic Balancer
      • Spark Plug Wires
      • Timing Cover
      • Spark Plugs
      • Air Cleaner
      • Oil Pan

      Recommended Break in Oil: BPP710 (Click Here)

      Recommended Service Oil: BPP10W30 (Click Here)

      Recommended Oil Filter: BPP51061 (Click Here)

      Notes:

      • *Will not clear a stock Corvette hood. Please call for special build options.
      • This engine features a true 4-inch bore, which mathematically yields 377 CID with a 3.75-inch stroke.
      • Not for use in pollution-controlled vehicles.
      • The performance aluminum cylinder heads on this engine feature a .500 raised port vs OEM.


    • Description
      This engine is designed and manufactured to factory specs for the specified vehicles below. It's manufactured using tighter machining tolerances, higher quality components, and finer balancing of the rotating assembly to make this engine better than the original while still meeting the description of a “replacement” engine.
    • Warranty

      The satisfaction of our customers is our highest priority at BluePrint Engines. We use quality components to balance your engine's rotating assembly within two grams of spec. We dyno test your crate engine and certify that it's ready to deliver horsepower and torque.

      We give your BluePrint engine the industry's best-in-class warranty for 30-months / 50,000 miles — with the extra confidence only BluePrint can provide. Our warranty applies to individual or professional installations and is fully transferable.

    • Notes
      • Designed as factory replacement long block for specified vehicles and year ranges, using OEM specification parts. Customer to re-use existing intake manifold, ecu (if equipped), exhaust, fuel system etc. Modification or replacement of provided tinware, and minor accommodations such as dipstick location may be required.
      • Specifically designed as an OEM spec engine to meet emissions requirements of the specified vehicles, to meet the criteria of "replacement engine" in all 50 states.
      • If your vehicle was originally equipped with a 2-piece rear main seal crankshaft, a new flex plate or flywheel will be required. Note for those same early applications, this block features the dipstick on the Passenger side.
      • Must verify with application list linked above for fitment.
    • Also Includes
      • New Valve Covers
      • Rear Sump Oil Pan
      • Timing Cover
      • Harmonic Balancer

      Recommended Break in Oil: BPP710 (Click Here)

      Recommended Service Oil: BPP10W30 (Click Here)

      Recommended Oil Filter: BPP51061 (Click Here)

    • Ignition Timing
      • OEM Specifications
    • Cam Specs
      • Hydraulic Flat Tappet
      • OEM Spec Per Listed Vehicles
    • Cylinder Heads
      • Perimeter Bolt Iron Cylinder Heads
    • Rotating Assembly
      • Cast Crankshaft
      • 3.480" Stroke
      • Forged 5.700" Connecting Rods
      • OEM Spec Pistons
      • Internally Balanced Front - Externally Balanced Rear Engine
    • Customer Reviews
      No comments
      SEE ALL
  • Customer Reviews
    No comments
BACK