GM Big Block Compatible 632 c.i. Power Adder Engine - 775 Horsepower - Long Block
-
Detail
- Detail
Description:
The old adage of “there’s no replacement for displacement” is becoming … dare we say old? These days naturally aspirated engines just aren’t enough for some – and we are here for it!
- Horsepower & Torque: 775 Horsepower / 750 FT LBS Naturally Aspirated
- Compression Ratio: 9.6:1
- Aluminum Heads
- Hydraulic Roller Cam
- Forged Crank
- Forged Pistons
Block:
- BluePrint Engines High Strength Cast Iron Block
- Manufactured and Machined in the USA!
- 4-Bolt Main
- 4.600" Bore
- 1-Piece Rear Main Seal
- Tall Deck (Cylinder Deck is Approx .400 Taller / Wider than OEM Block)
Rotating Assembly:
- New BluePrint Forged Crankshaft
- 4.750" Stroke
- Forged H-beam 6.635" Connecting Rods
- ARP 2000 Series Bolts
- Mahle Motorsports Forged Pistons
- Precision Gap, Power Adder Piston Rings
- Internally Balanced
Cylinder Heads:
- BluePrint Aluminum Cylinder Heads - PS8012
- 119cc Chamber
- 2.30" Intake / 1.88" Exhaust Valves
- 358cc Intake / 125cc Exhaust Runners
- Cylinder Heads Feature a .300 in. Raised Exhaust Port vs an OEM Casting.
- MLS Head Gaskets
Cam Specs:
- Cam Type: Roller
- .698 Intake / .698 Exhaust Lift
- 272 Intake / 282 Exhaust Duration
- @.050-110 Degree Lobe Separation
Also Includes:
- Valve Covers
- Oil Pan
- Timing Cover
- SFI Rated Dual Keyway 8 in. Balancer
Notes:
- Built and designed for Power Adder applications. Dual keyway crankshaft included.
- Not for use in pollution-controlled vehicles.
- This engine features .300 raised exhaust ports and .400 deck height increase over OEM.
- Must verify clearance of exhaust, shift linkage, steering components etc. before ordering.
- DescriptionThis engine is designed and manufactured to factory specs for the specified vehicles below. It's manufactured using tighter machining tolerances, higher quality components, and finer balancing of the rotating assembly to make this engine better than the original while still meeting the description of a “replacement” engine.
- Warranty
The satisfaction of our customers is our highest priority at BluePrint Engines. We use quality components to balance your engine's rotating assembly within two grams of spec. We dyno test your crate engine and certify that it's ready to deliver horsepower and torque.
We give your BluePrint engine the industry's best-in-class warranty for 30-months / 50,000 miles — with the extra confidence only BluePrint can provide. Our warranty applies to individual or professional installations and is fully transferable.
- Notes
- Designed as factory replacement long block for specified vehicles and year ranges, using OEM specification parts. Customer to re-use existing intake manifold, ecu (if equipped), exhaust, fuel system etc. Modification or replacement of provided tinware, and minor accommodations such as dipstick location may be required.
- Specifically designed as an OEM spec engine to meet emissions requirements of the specified vehicles, to meet the criteria of "replacement engine" in all 50 states.
- If your vehicle was originally equipped with a 2-piece rear main seal crankshaft, a new flex plate or flywheel will be required. Note for those same early applications, this block features the dipstick on the Passenger side.
- Must verify with application list linked above for fitment.
- Also Includes
- New Valve Covers
- Rear Sump Oil Pan
- Timing Cover
- Harmonic Balancer
Recommended Break in Oil: BPP710 (Click Here)
Recommended Service Oil: BPP10W30 (Click Here)
Recommended Oil Filter: BPP51061 (Click Here)
- Ignition Timing
- OEM Specifications
- Cam Specs
- Hydraulic Flat Tappet
- OEM Spec Per Listed Vehicles
- Cylinder Heads
- Perimeter Bolt Iron Cylinder Heads
- Rotating Assembly
- Cast Crankshaft
- 3.480" Stroke
- Forged 5.700" Connecting Rods
- OEM Spec Pistons
- Internally Balanced Front - Externally Balanced Rear Engine
- Customer ReviewsNo commentsSEE ALL
-
-
Customer ReviewsNo comments