Home
/
GM COMPATIBLE>BIG BLOCKS>496 ci
/
GM Big Block Compatible 496 c.i. Engine - 600 Horsepower - Base Dressed - Fuel Injected
GM Big Block Compatible 496 c.i. Engine - 600 Horsepower - Base Dressed - Fuel Injected
Quantity
-
Detail
- Detail
Description:
- Horsepower & Torque: 600 Horsepower / 568 ft. lbs. Torque
- Compression Ratio: 10.1:1
- BluePrint Engines Aluminum Heads
- BluePrint Engines Hydraulic Roller Cam
- BluePrint Engines Forged Crank
- BluePrint Engines Hypereutectic Pistons
Block:
- BluePrint Engines High Strength Cast Iron Block, 454 BBC
- Manufactured and Machined in the USA!
- Mech Fuel Pump Provision: Yes
- 1-Piece Rear Main Seal
- Standard Deck
- 4-Bolt Main
- 4.310" Bore
Rotating Assembly:
- BluePrint Forged Steel Crankshaft
- 4.250" Stroke
- OEM type 6.135" Connecting Rods w/ 150,000 PSI Bolts
- Hypereutectic Pistons
- Externally Balanced Front and Rear
Cylinder Heads:
- BluePrint Aluminum Cylinder Heads - PS8013
- 119cc Chamber
- 2.30" Intake / 1.88" Exhaust Valves
- 316cc Intake / 124cc Exhaust Runners
- Cylinder Heads Feature a .300 in. Raised Exhaust Port vs an OEM Casting.
- Must Verify Header / Exhaust Clearance
Cam Specs:
- Hydraulic Roller
- .647 Intake / .647 Exhaust Lift
- 248 Intake / 254 Exhaust Duration
- @ .050-112 Degree Lobe Separation
Ignition Timing:
- 10-16° Initial and Total Timing 32-34° at 3500 RPM
Also Includes:
- Intake Manifold Single Plane, Satin Aluminum - BPP454540INT
- Holley Sniper 2 EFI System - BPP550-510-3XX
- HEI Ready Run Distributor - BPP350RBK
- Timing Cover
- Valve Covers
- Oil Pan
Notes:
- Not for EGR
- Features External 42.5 oz. imbalance. Recommend BluePrint Engines flywheel 14096987 , or BluePrint Engines flex plate 399973 .
- DescriptionThis engine is designed and manufactured to factory specs for the specified vehicles below. It's manufactured using tighter machining tolerances, higher quality components, and finer balancing of the rotating assembly to make this engine better than the original while still meeting the description of a “replacement” engine.
- Warranty
The satisfaction of our customers is our highest priority at BluePrint Engines. We use quality components to balance your engine's rotating assembly within two grams of spec. We dyno test your crate engine and certify that it's ready to deliver horsepower and torque.
We give your BluePrint engine the industry's best-in-class warranty for 30-months / 50,000 miles — with the extra confidence only BluePrint can provide. Our warranty applies to individual or professional installations and is fully transferable.
- Notes
- Designed as factory replacement long block for specified vehicles and year ranges, using OEM specification parts. Customer to re-use existing intake manifold, ecu (if equipped), exhaust, fuel system etc. Modification or replacement of provided tinware, and minor accommodations such as dipstick location may be required.
- Specifically designed as an OEM spec engine to meet emissions requirements of the specified vehicles, to meet the criteria of "replacement engine" in all 50 states.
- If your vehicle was originally equipped with a 2-piece rear main seal crankshaft, a new flex plate or flywheel will be required. Note for those same early applications, this block features the dipstick on the Passenger side.
- Must verify with application list linked above for fitment.
- Also Includes
- New Valve Covers
- Rear Sump Oil Pan
- Timing Cover
- Harmonic Balancer
Recommended Break in Oil: BPP710 (Click Here)
Recommended Service Oil: BPP10W30 (Click Here)
Recommended Oil Filter: BPP51061 (Click Here)
- Ignition Timing
- OEM Specifications
- Cam Specs
- Hydraulic Flat Tappet
- OEM Spec Per Listed Vehicles
- Cylinder Heads
- Perimeter Bolt Iron Cylinder Heads
- Rotating Assembly
- Cast Crankshaft
- 3.480" Stroke
- Forged 5.700" Connecting Rods
- OEM Spec Pistons
- Internally Balanced Front - Externally Balanced Rear Engine
- Customer ReviewsNo commentsSEE ALL
-
-
Customer ReviewsNo comments