Home / BUILDER SERIES>GM COMPATIBLE>376 ci / GM LS Compatible 376 c.i. Engine and 4L65/70E Automatic Transmission - 530 Horsepower - Standard Edition Builder Series - Black Pulley Kit - Holley Terminator X EFI System
  • GM LS Compatible 376 c.i. Engine and 4L65/70E Automatic Transmission - 530 Horsepower - Standard Edition Builder Series - Black Pulley Kit - Holley Terminator X EFI System
  • GM LS Compatible 376 c.i. Engine and 4L65/70E Automatic Transmission - 530 Horsepower - Standard Edition Builder Series - Black Pulley Kit - Holley Terminator X EFI System
  • GM LS Compatible 376 c.i. Engine and 4L65/70E Automatic Transmission - 530 Horsepower - Standard Edition Builder Series - Black Pulley Kit - Holley Terminator X EFI System
  • GM LS Compatible 376 c.i. Engine and 4L65/70E Automatic Transmission - 530 Horsepower - Standard Edition Builder Series - Black Pulley Kit - Holley Terminator X EFI System
  • GM LS Compatible 376 c.i. Engine and 4L65/70E Automatic Transmission - 530 Horsepower - Standard Edition Builder Series - Black Pulley Kit - Holley Terminator X EFI System
  • GM LS Compatible 376 c.i. Engine and 4L65/70E Automatic Transmission - 530 Horsepower - Standard Edition Builder Series - Black Pulley Kit - Holley Terminator X EFI System
  • GM LS Compatible 376 c.i. Engine and 4L65/70E Automatic Transmission - 530 Horsepower - Standard Edition Builder Series - Black Pulley Kit - Holley Terminator X EFI System
  • GM LS Compatible 376 c.i. Engine and 4L65/70E Automatic Transmission - 530 Horsepower - Standard Edition Builder Series - Black Pulley Kit - Holley Terminator X EFI System
  • GM LS Compatible 376 c.i. Engine and 4L65/70E Automatic Transmission - 530 Horsepower - Standard Edition Builder Series - Black Pulley Kit - Holley Terminator X EFI System
  • GM LS Compatible 376 c.i. Engine and 4L65/70E Automatic Transmission - 530 Horsepower - Standard Edition Builder Series - Black Pulley Kit - Holley Terminator X EFI System

GM LS Compatible 376 c.i. Engine and 4L65/70E Automatic Transmission - 530 Horsepower - Standard Edition Builder Series - Black Pulley Kit - Holley Terminator X EFI System

Quantity
ADD TO CART
BUY IT NOW
  • Detail
    • Detail

      Description :

      • Horsepower & Torque: 530 Horsepower / 495 ft. lbs. Torque
      • Compression Ratio: 10.7:1
      • BluePrint Engines Aluminum Heads
      • BluPrint Engines Hydraulic Roller Cam
      • BluePrint Engines Hypereutectic Pistons
      • Nodular Iron Crankshaft

      Block:

      • BluePrint Engines High Strength Cast Iron (LSX Style) Block
      • Increased Deck Thickness and Strength Webbing
      • Extended Cylinder Skirt
      • Priority Main Oiling
      • 6-Bolt Main
      • 1-Piece Rear Main Seal
      • Improved Water Jacket Design
      • Utilizes OEM LS3 Front and Rear Covers

      Rotating Assembly:

      • Nodular Iron Crankshaft
      • 3.622" Stroke
      • 6.098" Connecting Rods w/ 150,000 PSI Bolts
      • Hypereutectic Pistons
      • Internally Balanced Front and Rear

      Cylinder Heads:

      • BluePrint Aluminum Cylinder Heads - PS8015
      • 72cc Chamber
      • 2.165" Intake - 1.600" Exhaust Valves
      • 259cc Intake - 102cc Exhaust Runners

      Cam Specs:

      • Hydraulic Roller Cam
      • .612 Intake - .585 Exhaust Lift
      • 225 Intake - 238 Exhaust Duration
      • @.050-113 Degree Lobe Separation, 110 ICL

      Holley Terminator X Max Specific Features and Benefits:

      • Real Time Fuel Map Learning Simplifies Tuning by Dynamically Adjusting the Base Fuel Rate
      • On Board Bosch LSU 4.9 Wideband Control, Enabling Accurate AFR Readings and Closed Loop Tuning
      • Eight High Impedance Injector Drivers, Ideal for Stock LS Injectors and Holley EFI Injectors
      • Integrated 1-Bar MAP Sensor for Naturally Aspirated or Nitrous Setups, with Harness Support for External Higher Bar Sensors if needed
      • 4 Configurable Inputs (12V, Ground, 5V, Frequency) and 2 Outputs (Ground, PWM) - Ideal for Electric Fans, Boost Control Solenoids, Nitrous Control and more
      • Free PC Tuning Software via USB/CAN Interface for Full Laptop Control and Advance Setup
      • Integrated 3.5" Touchscreen Handheld with Setup Wizard, Internal Data Logging, and Real Time Gauge Displays
      • Terminator X Max ECU will Include a Base Timing Map Pre-Configured for this engine

      Also Includes:

      • Black Front Accessory Drive with LT1 Style 150-amp Alternator, LT1 Style Water Pump, Type II Power Steering Pump with Baffled Edges, and Compact Style A/C Compressor
      • BluePrint Engines Fuel Injectors and Rail
      • Low Profile Swap Oil Pan - BPP81073
      • DBW Throttle Body - BPP12191019
      • Loaded Intake Manifold
      • Spark Plugs and Wires
      • Harmonic Balancer
      • Coil Packs

      Assembled with Complete 4l65/70e 4 Speed Automatic Transmission Package:

      • 4L65/70E Complete Package
      • Electronic Transmission Controller Included
      • 2200-2400 Stall Torque Converter
      • Flex Plate
      • Starter

      Notes:

      • BluePrint Engines Recommends Air Intake Kit BPPLS01013 to ensure correct MAF calculations and Dyno calibration are maintained with the above ECU / tuning.
      • Engine/Trans Package Ships assembled


    • Description
      This engine is designed and manufactured to factory specs for the specified vehicles below. It's manufactured using tighter machining tolerances, higher quality components, and finer balancing of the rotating assembly to make this engine better than the original while still meeting the description of a “replacement” engine.
    • Warranty

      The satisfaction of our customers is our highest priority at BluePrint Engines. We use quality components to balance your engine's rotating assembly within two grams of spec. We dyno test your crate engine and certify that it's ready to deliver horsepower and torque.

      We give your BluePrint engine the industry's best-in-class warranty for 30-months / 50,000 miles — with the extra confidence only BluePrint can provide. Our warranty applies to individual or professional installations and is fully transferable.

    • Notes
      • Designed as factory replacement long block for specified vehicles and year ranges, using OEM specification parts. Customer to re-use existing intake manifold, ecu (if equipped), exhaust, fuel system etc. Modification or replacement of provided tinware, and minor accommodations such as dipstick location may be required.
      • Specifically designed as an OEM spec engine to meet emissions requirements of the specified vehicles, to meet the criteria of "replacement engine" in all 50 states.
      • If your vehicle was originally equipped with a 2-piece rear main seal crankshaft, a new flex plate or flywheel will be required. Note for those same early applications, this block features the dipstick on the Passenger side.
      • Must verify with application list linked above for fitment.
    • Also Includes
      • New Valve Covers
      • Rear Sump Oil Pan
      • Timing Cover
      • Harmonic Balancer

      Recommended Break in Oil: BPP710 (Click Here)

      Recommended Service Oil: BPP10W30 (Click Here)

      Recommended Oil Filter: BPP51061 (Click Here)

    • Ignition Timing
      • OEM Specifications
    • Cam Specs
      • Hydraulic Flat Tappet
      • OEM Spec Per Listed Vehicles
    • Cylinder Heads
      • Perimeter Bolt Iron Cylinder Heads
    • Rotating Assembly
      • Cast Crankshaft
      • 3.480" Stroke
      • Forged 5.700" Connecting Rods
      • OEM Spec Pistons
      • Internally Balanced Front - Externally Balanced Rear Engine
    • Customer Reviews
      No comments
      SEE ALL
  • Customer Reviews
    No comments
BACK