Home / BUILDER SERIES>FORD COMPATIBLE>BRONCO DRESS / Ford Small Block Compatible 302 c.i. Engine and 4R70W Automatic Transmission - 365 Horsepower - Bronco Edition Builder Series - Black Pulley Kit - Fuel Injected
  • Ford Small Block Compatible 302 c.i. Engine and 4R70W Automatic Transmission - 365 Horsepower - Bronco Edition Builder Series - Black Pulley Kit - Fuel Injected
  • Ford Small Block Compatible 302 c.i. Engine and 4R70W Automatic Transmission - 365 Horsepower - Bronco Edition Builder Series - Black Pulley Kit - Fuel Injected
  • Ford Small Block Compatible 302 c.i. Engine and 4R70W Automatic Transmission - 365 Horsepower - Bronco Edition Builder Series - Black Pulley Kit - Fuel Injected
  • Ford Small Block Compatible 302 c.i. Engine and 4R70W Automatic Transmission - 365 Horsepower - Bronco Edition Builder Series - Black Pulley Kit - Fuel Injected
  • Ford Small Block Compatible 302 c.i. Engine and 4R70W Automatic Transmission - 365 Horsepower - Bronco Edition Builder Series - Black Pulley Kit - Fuel Injected
  • Ford Small Block Compatible 302 c.i. Engine and 4R70W Automatic Transmission - 365 Horsepower - Bronco Edition Builder Series - Black Pulley Kit - Fuel Injected
  • Ford Small Block Compatible 302 c.i. Engine and 4R70W Automatic Transmission - 365 Horsepower - Bronco Edition Builder Series - Black Pulley Kit - Fuel Injected

Ford Small Block Compatible 302 c.i. Engine and 4R70W Automatic Transmission - 365 Horsepower - Bronco Edition Builder Series - Black Pulley Kit - Fuel Injected

Quantity
ADD TO CART
BUY IT NOW
  • Detail
    • Detail

      Description:

      • Horsepower & Torque: 365 Horsepower / 365 ft. lbs. Torque
      • Compression Ratio: 10.0:1
      • Aluminum Heads
      • Hydraulic Roller Cam
      • Hypereutectic Pistons

      Block:

      • BluePrint Engines High Strength Cast Iron Block
      • 4-Bolt Main
      • 4.000" Bore
      • 1-Piece Rear Main Seal

      Rotating Assembly:

      • Cast Crankshaft
      • 3.000" Stroke
      • OEM Type 5.090" Connecting Rods
      • Hypereutectic Pistons
      • 50oz External Balance

      Cylinder Heads:

      • BluePrint Aluminum Cylinder Heads - HP9009
      • 60cc Chamber
      • 2.02" Intake / 1.60" Exhaust Valves
      • 190cc Intake / 60cc Exhaust Runners

      Cam Specs:

      • Cam Type: Roller
      • .533 Intake / .544 Exhaust Lift
      • 215 Intake / 220 Exhaust Duration
      • @.050-114 Degree Lobe Separation

      Ignition Timing:

      • 34 Degrees Total at 3500 RPM

      Also Includes:

      • Dual Plane, Satin Aluminum Intake Manifold
      • Holley Sniper 2 EFI System
      • Spark Plugs and Wires
      • Distributor
      • Valve Covers
      • Dual/Rear Sump Oil Pan

      Assembled with Complete 4R70W 4WD Ready – Automatic Transmission Package:

      • Includes Electronic Transmission Controller
      • Transmission Built to 650 HP
      • 2200-2600 Stall Torque Converter
      • Flex Plate
      • Starter
      • TPS Breakout Harness Included for Integration with Transmission Controller
      • 4 Speed, Overdrive transmission w/Lockup
      • Specifically Prepped for Dana 20 Transfer Case (1966-1976). Transfer case is NOT included.
      • GEAR RATIOS
        • First: 2.84 :1.
        • Second: 1.55 :1.
        • Third: 1.00 :1.
        • Overdrive: 0.70 :1.
        • Reverse: 2.32 :1.

      Accessory Drive Installed and Included:

      • Front Accessory Drive with A/C Compressor, Water Pump, Alternator and Power Steering Pump

      Notes:

      • The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment. Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles.
      • Note that 4R70W transmission may require modifications/replacement of driveshaft, transmission mount, exhaust routing, etc.
      • This engine can be used on all vehicles that were manufactured before emissions control regulations were imposed. These vehicles are considered "uncontrolled vehicles."
      • Uncontrolled Vehicles are Defined as:
        • 1965 and older U.S. manufactured California Certified vehicles
        • 1967 and older U.S. manufactured Federally Certified vehicles
        • 1967 and older Foreign manufactured vehicles
      • Package Ships assembled as pictured.


    • Description
      This engine is designed and manufactured to factory specs for the specified vehicles below. It's manufactured using tighter machining tolerances, higher quality components, and finer balancing of the rotating assembly to make this engine better than the original while still meeting the description of a “replacement” engine.
    • Warranty

      The satisfaction of our customers is our highest priority at BluePrint Engines. We use quality components to balance your engine's rotating assembly within two grams of spec. We dyno test your crate engine and certify that it's ready to deliver horsepower and torque.

      We give your BluePrint engine the industry's best-in-class warranty for 30-months / 50,000 miles — with the extra confidence only BluePrint can provide. Our warranty applies to individual or professional installations and is fully transferable.

    • Notes
      • Designed as factory replacement long block for specified vehicles and year ranges, using OEM specification parts. Customer to re-use existing intake manifold, ecu (if equipped), exhaust, fuel system etc. Modification or replacement of provided tinware, and minor accommodations such as dipstick location may be required.
      • Specifically designed as an OEM spec engine to meet emissions requirements of the specified vehicles, to meet the criteria of "replacement engine" in all 50 states.
      • If your vehicle was originally equipped with a 2-piece rear main seal crankshaft, a new flex plate or flywheel will be required. Note for those same early applications, this block features the dipstick on the Passenger side.
      • Must verify with application list linked above for fitment.
    • Also Includes
      • New Valve Covers
      • Rear Sump Oil Pan
      • Timing Cover
      • Harmonic Balancer

      Recommended Break in Oil: BPP710 (Click Here)

      Recommended Service Oil: BPP10W30 (Click Here)

      Recommended Oil Filter: BPP51061 (Click Here)

    • Ignition Timing
      • OEM Specifications
    • Cam Specs
      • Hydraulic Flat Tappet
      • OEM Spec Per Listed Vehicles
    • Cylinder Heads
      • Perimeter Bolt Iron Cylinder Heads
    • Rotating Assembly
      • Cast Crankshaft
      • 3.480" Stroke
      • Forged 5.700" Connecting Rods
      • OEM Spec Pistons
      • Internally Balanced Front - Externally Balanced Rear Engine
    • Customer Reviews
      No comments
      SEE ALL
  • Customer Reviews
    No comments