Home / BUILDER SERIES>CHRYSLER COMPATIBLE>408 ci / Chrysler Small Block Compatible 408 c.i. Engine and 727 Automatic Transmission - 465 Horsepower - Standard Edition Builder Series - Polished Pulley Kit - Carbureted
  • Chrysler Small Block Compatible 408 c.i. Engine and 727 Automatic Transmission - 465 Horsepower - Standard Edition Builder Series - Polished Pulley Kit - Carbureted
  • Chrysler Small Block Compatible 408 c.i. Engine and 727 Automatic Transmission - 465 Horsepower - Standard Edition Builder Series - Polished Pulley Kit - Carbureted
  • Chrysler Small Block Compatible 408 c.i. Engine and 727 Automatic Transmission - 465 Horsepower - Standard Edition Builder Series - Polished Pulley Kit - Carbureted
  • Chrysler Small Block Compatible 408 c.i. Engine and 727 Automatic Transmission - 465 Horsepower - Standard Edition Builder Series - Polished Pulley Kit - Carbureted
  • Chrysler Small Block Compatible 408 c.i. Engine and 727 Automatic Transmission - 465 Horsepower - Standard Edition Builder Series - Polished Pulley Kit - Carbureted

Chrysler Small Block Compatible 408 c.i. Engine and 727 Automatic Transmission - 465 Horsepower - Standard Edition Builder Series - Polished Pulley Kit - Carbureted

Quantity
ADD TO CART
BUY IT NOW
  • Detail
    • Detail

      Description:

      • Horsepower & Torque: 465 Horsepower / 494 FT. LBS. Torque
      • Compression Ratio: 10:1
      • Aluminum Heads
      • Roller Cam
      • Cast Crank
      • Forged Pistons

      Block:

      • Hand-Picked Seasoned Magnum Block
      • Square and Parallel Decked
      • Align Honed Main Bearing Bore
      • Cylinders Honed on Computer Controlled Machine to Within .0002 Straightness and Roundness
      • Cylinders are Sonic Tested for Thickness
      • 2-Bolt Main
      • 4.040" Bore
      • 2-Piece Rear Main Seal
      • Mech Fuel Pump Provision: Yes

      Rotating Assembly:

      • Cast Crankshaft
      • 4.000" Stroke
      • Forged Magnum 6.123" Connecting Rods w/ 150,000 PSI Bolts
      • Forged Pistons
      • Externally Balanced Front and Rear

      Cylinder Heads:

      • BluePrint Engines Assembled and Machined Edelbrock 61769 Casting
      • Aluminum Magnum Pattern Cylinder Heads - 58cc chamber
      • Aluminum Roller Rockers
      • 2.02" intake / 1.60" Exhaust Valves
      • 176cc intake / 75cc Exhaust Runners

      Cam Specs:

      • Cam Type: Roller
      • .544 Intake / .541 Exhaust Lift
      • 236 Intake / 242 Exhaust Duration
      • @.050-110 Degree Lobe Separation

      Ignition Timing:

      • 34 Degrees Total at 4000 RPM

      Also Includes:

      • Front Accessory Drive with Alternator, A/C Compressor, Power Steering Pump, and Water Pump
      • Holley 750cfm Classic Carburetor - BPP080508S
      • Performance Built Transmission
      • Performance 727 Transmission with 2200-2600 Stall.
      • Thermostat and Thermostat Housing
      • 10-inch Torque Converter
      • Fuel Pump and Fuel Line
      • Spark Plugs and Wires
      • Harmonic Balancer
      • Timing Cover
      • Valve Covers
      • Water Pump
      • Air Cleaner
      • Distributor
      • Starter
      • Oil Pan

      Notes:

      • The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment. Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles.
      • Non-A/C front accessory drives are also available.

    • Description
      This engine is designed and manufactured to factory specs for the specified vehicles below. It's manufactured using tighter machining tolerances, higher quality components, and finer balancing of the rotating assembly to make this engine better than the original while still meeting the description of a “replacement” engine.
    • Warranty

      The satisfaction of our customers is our highest priority at BluePrint Engines. We use quality components to balance your engine's rotating assembly within two grams of spec. We dyno test your crate engine and certify that it's ready to deliver horsepower and torque.

      We give your BluePrint engine the industry's best-in-class warranty for 30-months / 50,000 miles — with the extra confidence only BluePrint can provide. Our warranty applies to individual or professional installations and is fully transferable.

    • Notes
      • Designed as factory replacement long block for specified vehicles and year ranges, using OEM specification parts. Customer to re-use existing intake manifold, ecu (if equipped), exhaust, fuel system etc. Modification or replacement of provided tinware, and minor accommodations such as dipstick location may be required.
      • Specifically designed as an OEM spec engine to meet emissions requirements of the specified vehicles, to meet the criteria of "replacement engine" in all 50 states.
      • If your vehicle was originally equipped with a 2-piece rear main seal crankshaft, a new flex plate or flywheel will be required. Note for those same early applications, this block features the dipstick on the Passenger side.
      • Must verify with application list linked above for fitment.
    • Also Includes
      • New Valve Covers
      • Rear Sump Oil Pan
      • Timing Cover
      • Harmonic Balancer

      Recommended Break in Oil: BPP710 (Click Here)

      Recommended Service Oil: BPP10W30 (Click Here)

      Recommended Oil Filter: BPP51061 (Click Here)

    • Ignition Timing
      • OEM Specifications
    • Cam Specs
      • Hydraulic Flat Tappet
      • OEM Spec Per Listed Vehicles
    • Cylinder Heads
      • Perimeter Bolt Iron Cylinder Heads
    • Rotating Assembly
      • Cast Crankshaft
      • 3.480" Stroke
      • Forged 5.700" Connecting Rods
      • OEM Spec Pistons
      • Internally Balanced Front - Externally Balanced Rear Engine
    • Customer Reviews
      No comments
      SEE ALL
  • Customer Reviews
    No comments
BACK